Fibre Fix 5-in-1 Builder Base
Two ways to use your builder gel — base coat or full builder
You'll need: Fibre Base (Builder Gel), LED Lamp, Nail File & Buffer, Gel Brush, Top Coat
Apply - One thin, even layer across the nail.Cure 60–90s
Colour (Solid Gel) - Apply the gel evenly, then cure.Cure 60–90s
Top Coat - Seal in your mani by curing for 60–90s.Cure 60–90s
Scoop & Place - Scoop out a bead sized amount of builder gel and place in the middle of your nail. Guide the gel from the middle towards the outer edges of your nail using the thin precision tip side of your 2-in-1 brush. Spread the gel out until you end up with an even application over the whole nail.Cure 60–90s · apply & cure one nail at a time to avoid flooding
Seal - Apply top coat to seal in the builder gel and cure for 60–90 seconds
FYI : You can add colours on the builder gel then seal it with top coat.
Take your time with guiding the gel · keep brush lightly wet to avoid dragging · cap the free edge to prevent lifting · buff, file and wipe nails with alcohol for the longest mani results
